Remote transmission vortex flowmeter realizes remote transmission function

For ordinary vortex flowmeters, the standard current output signal of 4-20mA is generally used. The 4-20mA signal output is instantaneous flow, that is, the fluid flow data measured in real time. This signal cannot achieve the remote invasive function, so if you want to achieve the remote invasive function, you need to select another output signal.

In order to realize the remote transmission function, when selecting a vortex flowmeter, you need to choose one with pulse output, RS485 or HART, etc. They can remotely transmit wet measured flow data to the control room of the monitoring center through modern communication technology to achieve timely monitoring and control of process parameters.

With the data interface and communication protocol capable of remote transmission, the remote transmission function is naturally no longer a problem. Therefore, you must pay attention to the signal output model when selecting. If you don’t know which one to choose, contact the supplier’s engineer in time.