Field display integrated temperature transmitter is usually associated with When used in conjunction with display instruments, recording instruments, electronic computers, PLC, DCS systems, etc.
Brief introduction
On-site display integrated temperature transmitter, WZPB-94S, WZPB-94AM, WZPB-94S WZCB-94M, WZPC-94S, WZPC-94AM, WZPC-94AS integrated Thermocouple thermal resistance field display integrated temperature transmitter.
Detailed introduction of field display integrated temperature transmitter
Field display integrated temperature transmitter is usually associated with When used in conjunction with display instruments, recording instruments, electronic computers, PLC, DCS systems, etc., the integrated thermocouple (resistance) can directly display the actual measured temperature on-site. The display method includes on-site LED and LCD display, with backlight. Accurate numbers can be clearly read at night and under strong sunlight. It also converts the temperature signal into a 4-20mA DC current signal and overlays the HART communication protocol to directly measure liquids in the range of -200 to 1800°C in various processes. , steam and gas and solid surface temperature measurement.
Features
On-site display
LED and LCD backlight display
On-site display integrated temperature transmitter two-wire output 4-20mA D.C is overlaid with HART communication protocol and has strong anti-interference ability
Save expensive compensation wires
Protection level: IP65
Explosion-proof level: dⅡTC4, dⅡTC5 , dⅡTC6
Working principle
The explosion-proof thermocouple (resistance) uses the gap isolation principle. When an explosion occurs in the cavity, it can be extinguished and cooled through the gap in the junction box, so that the flame after the explosion It cannot be transmitted outside the cavity, thus achieving the explosion-proof effect.
The working principle of the thermocouple resistance is to directly convert the thermoelectric potential and resistance signal measured by the thermocouple (resistance) into a 4-20mA D.C current signal and a digital (HART) signal, which are directly transmitted to the host computer. The working instrument can display the corresponding temperature.
On-site display integrated temperature transmitter product technical standards
IEC584
IEC571
JB/T
On-site display integrated temperature transmitter JB/T
Product model
Mobile threaded pipe joint type on-site display integrated temperature Transmitter SBWZ, SBWR WRMB-94M, WRMB-94S, WRMB-94AM, WRMB-94AS WRNB-94M, WRNB-94S, WRNB-94AM, WRNB-94AS WREB-94M, WREB-94S, WREB-94AM, WREB- 94AS WRCB-94M, WRCB-94S, WRCB-94AM, WRCB-94AS WRFB-94M, WRFB-94S, WRFB-94AM, WRFB-94AS WZPB-94M, WZPB-94S, WZPB-94AM, WZPB-94S WZCB-94M, WZPC-94S, WZPC-94AM, WZPC-94AS integrated thermocouple thermal resistance.
The thermal mass flow meter is designed based on the principle of thermal diffusion. The instrument uses the constant temperature difference method to accurately measure the gas. It has the advantages of small size, high degree of digitization, convenient installation and accurate measurement. Reduce your energy costs and increase your sustainability. Monitor your consumption and analyze your leakage flows with just one measuring device.
Mass Flow Meter is a new type of advanced flow measurement instrument and has been rapidly developed in the world. It has been widely used for process detection and custody transfer measurement in many industries such as petroleum, petrochemical, chemical, pharmacy, marine, pharmaceutical, municipal, paper, food and energy and so on. It has been highly valued by the flow research community and welcomed by users at home and abroad.
SUP-1158S Wall mounted clamp on ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance.
SUP-2100H ultrasonic flow meter uses advance circuit design,coupled with excellent hardware designed in English and can be switched surfaces.It is easy to operate and with stable performance.
Hangzhou Economic Development Area，Hangzhou 310018，China
Supmea Co., Ltd. is a national high-tech enterprise engaged in the research and development, manufacturing, sales, and service of process automation instruments. Professional production of Magnetic flowmeter, Magmeter flow meter, Vortex flowmeter, Turbine flowmeter, Ultrasonic flowmeter, and Thermal mass flowmeter.
Copyright © Supmea Automation Co.,Ltd All rights reserved. contact